Linux Boot Stick: EFI-Tricks - Wenn Bootstick nicht startet

Manche alte Laptops wie Convertibles sind im Bios kastriert, so dass man einen normalen Linux Boot Stick nicht ohne weiteres starten kann.

Übersicht

1. Bootstickgröße

2. Bios Einstellungen zu Secure Boot...

3. Partition Table speziell

1. Bootstickgröße oft max 4gb oder 8gb oder Partitionsgröße begrenzen

2. Secure Boot: ENABLED

Secure Boot Status: Disabled Platform Mode: Setup Mode Secure Boot Mode: Custom Mode

IPM Support: Enabled

3.

Der Stick muss ein spezielles Format haben und eine spezielle neue efi Datei soll dabei sein:

Weiter unten zitiert die Komplette Anleitung von https://forums.linuxmint.com/viewtopic.php?f=42&t=216857

Bei einem alten medion e1240t mit abnehmbarem Bildschirm, scheint die Installation nur zu klappen, wenn man beim Ziellaufwerk vorher die Partition Table als GPT schreibt. Löscht vorher alles wenn man mit gparted die Table neu schreibt. Auch braucht man zwei PArtitionen: Eine kleine bsp 750MB als efi laufwerk, das auch mit flag als"esp" und dadurch gleichzeitig als ""boot" setzt. Die zweite z.B. als ext4 für das Linux, was als / eigehangen werden muß (option wählen).

Dadurch scheint er beim neu schreiben der Partitionen etwas anders zu machen als bei der normalen Installation.

The Linux Mint team say that the Linux Mint 17.x 32bit version can't be use in UEFI mode. Only in BIOS mode. Now it is possible because I found a solution with the help of internet.

Here is the solution

You need four things:

- An Usb key. - The bootia32.efi file. - The Linux Mint 17.x 32bit version. - Gdisk must be installed.

1. Download the Linux Mint 17.x 32bit version in one of your home directory (for example: Downloads).

2. Find the bootia32.efi file on internet. You can find it here : http://webativo.com/uploads/files/usb-pack_efi.zip (unzip this file and search bootia32.efi in /usb-pack_efi/EFI/BOOT/ directory). Or here : https://github.com/jfwells/linux-asus-t ... otia32.efi (click on the raw button). If you want to create your own bootia32.efi file, check in the first source link below.

3. Plug your usb key. Check the letter of your device (via menu -> preferences -> disks).

4. Open a terminal window and make the following lines :

Code:

sudo sgdisk --zap-all /dev/sdx
sudo sgdisk --new=1:0:0 --typecode=1:ef00 /dev/sdx
sudo mkfs.vfat -F32 /dev/sdx1

Note: x must be the letter of your usb key. These commands create the GPT partition table on the usb key, an efi partition for the whole usb key (ef00) and a fat32 partition for sdx1.

5. Mount the fat32 partition on /mnt mount point via that command line:

Code:

sudo mount -t vfat /dev/sdx1 /mnt

Note: x must be the letter of your usb key.

6. Unzip the 32bit version iso on /mnt :

Code:

sudo 7z x /home/nameofyouruser/Downloads/linuxmint-17.x-xxxx-32bit.iso
-o/mnt/

7. Create the /EFI/BOOT/ directory in /mnt mount point :

Code:

sudo mkdir /mnt/EFI sudo mkdir /mnt/EFI/BOOT/

Now you've got an /EFI/BOOT/ directory that didn't exist before.

8. Copy the bootia32.efi file in /EFI/BOOT/:

Code:

sudo cp bootia32.efi /mnt/EFI/BOOT/

9. Umount the /mnt mount point :

Code:

sudo umount /mnt

10. Reboot the computer.

Enjoy !!!!

The links that help me: https://github.com/lopaka/instructions/ ... -x205ta.md http://ubuntuforums.org/showthread.php?t=2276498